Samurai TC 1–3 kVA - Samurai Power

Specifications

On-line “double conversion” technology (VFI)
DSP (digital signal processor) technology
Internal static and manual bypass
Input power factor up to 0.99
Battery (DC) cold start
Site wiring fault indication
Self testing at UPS start-up
RJ45/11 network protection
Intelligent management through RS232 & USB
For extended backup time check VFI 1000-3000 TCL series (external batteries)

Application

Samurai VFI 1–3 kVA TC UPS systems is a line of advanced, true on-line UPSs supplying clean, reliable and regulated AC power perfectly adapted to your needs.

Samurai VFI 1–3 kVA TC is an advanced, true on-line Uninterruptible Power Supply (UPS) providing reliable, regulated and stable voltage to any type of load. It is available in models supplying 1, 2 and 3 kVA.

Options

SNMP adapter
Relay card (dry contacts)
External maintenance bypass
Additional / external battery packs

Technical specification

Samurai Power VFI TC	1000	2000	3000
Power (VA / Watt)	1000 VA / 800 W	2000 VA / 1600 W	3000 VA / 2400 W
Input
Nominal voltage	220 / 230 / 240 V AC
Operating voltage range	115 ~ 295 V AC
Operating frequency range	50 / 60 Hz ± 10% (auto sensing)
Power factor	≥ 0.99
Output
Output voltage	>200 / 208 / 220 / 230 / 240 V AC ± 1%
Output frequency	Synchronized with the utility on AC mode; 50/60 Hz ± 0,2% on battery mode
Harmonic distortion (THD)	< 3% at 100% linear load
Crest factor	3:1 (max)
Voltage regulation	+/- 2% at nominal voltage
Efficiency at 75-100% load	> 86% (online), > 94% (high efficiency mode)
Battery
DC voltage	24 V DC	48 V DC	72 V DC
Battery type & number	12 V / 7 Ah x2	12 V / 7 Ah x4	12 V / 7 Ah x6
Backup time	50% load ≥ 5 min (Standard), long run unit depends on the capacity of external batteries
Charge current	4 A
Protection
RJ11/45 protection	Yes
Input / Output	Overvoltage, short-circuit, battery deep discharge, thermal protection
Overload in battery mode	101 ~ 150%: 30 sec, > 150%: 30 msec, before inverter cut off
Overload in AC mode	101 ~ 150%: 30 sec, > 150%: 30 msec before switching to bypass
Alarms – informations
Audible	Battery backup, battery low, overload status, fault status
LED	Mains, inverter, bypass, fault, battery level
LCD	Input and output voltage, load %, battery voltage, errors codes
Environmental
Operating / Storage temperature	0 ~ 40 °C / -25 to 55 °C
Humidity range / Altitude	0 – 95% (non-condensing) / < 1500 m
Audible noise at 1m	< 50 dB
Interface
Standard	RS232 / USB (software included)
Optional	SNMP / Relay card (dry contacts)
Dimensions
Weight (kg)	10.2	19.5	24
Dimensions W x D x H (mm)	144 x 405 x 215	191 x 455 x 332	191 x 455 x 332
Standard
EMC	IEC/EN62040-2, IEC/61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8
Safety	IEC/EN62040-1, IEC/EN60950-1