• Samurai VFI 1–3 kVA TC

Specifications

  • On-line “double conversion” technology (VFI)
  • DSP (digital signal processor) technology
  • Internal static and manual bypass
  • Input power factor up to 0.99
  • Battery (DC) cold start
  • Site wiring fault indication
  • Self testing at UPS start-up
  • RJ45/11 network protection
  • Intelligent management through RS232 & USB
  • For extended backup time check VFI 1000-3000 TCL series (external batteries)

Application

Samurai VFI 1–3 kVA TC
Samurai VFI 1–3 kVA TC
Samurai VFI 1–3 kVA TC

Samurai VFI 1–3 kVA TC UPS systems is a line of advanced, true on-line UPSs supplying clean, reliable and regulated AC power perfectly adapted to your needs.

Samurai VFI 1–3 kVA TC is an advanced, true on-line Uninterruptible Power Supply (UPS) providing reliable, regu­lated and stable voltage to any type of load. It is available in models supplying 1, 2 and 3 kVA.

Samurai VFI 1–3 kVA TC

Options

  • SNMP adapter
  • Relay card (dry contacts)
  • External maintenance bypass
  • Additional / external battery packs

Technical specification

Samurai Power VFI TC 1000 2000 3000
Power (VA / Watt) 1000 VA / 800 W 2000 VA / 1600 W 3000 VA / 2400 W
Input
Nominal voltage 220 / 230 / 240 V AC
Operating voltage range 115 ~ 295 V AC
Operating frequency range 50 / 60 Hz ± 10% (auto sensing)
Power factor ≥ 0.99
Output
Output voltage >200 / 208 / 220 / 230 / 240 V AC ± 1%
Output frequency Synchronized with the utility on AC mode; 50/60 Hz ± 0,2% on battery mode
Harmonic distortion (THD) < 3% at 100% linear load
Crest factor 3:1 (max)
Voltage regulation +/- 2% at nominal voltage
Efficiency at 75-100% load > 86% (online), > 94% (high efficiency mode)
Battery
DC voltage 24 V DC 48 V DC 72 V DC
Battery type & number 12 V / 7 Ah x2 12 V / 7 Ah x4 12 V / 7 Ah x6
Backup time 50% load ≥ 5 min (Standard), long run unit depends on the capacity of external batteries
Charge current 4 A
Protection
RJ11/45 protection Yes
Input / Output Overvoltage, short-circuit, battery deep discharge, thermal protection
Overload in battery mode 101 ~ 150%: 30 sec, > 150%: 30 msec, before inverter cut off
Overload in AC mode 101 ~ 150%: 30 sec, > 150%: 30 msec before switching to bypass
Alarms – informations
Audible Battery backup, battery low, overload status, fault status
LED Mains, inverter, bypass, fault, battery level
LCD Input and output voltage, load %, battery voltage, errors codes
Environmental
Operating / Storage temperature 0 ~ 40 °C / -25 to 55 °C
Humidity range / Altitude 0 – 95% (non-condensing) / < 1500 m
Audible noise at 1m < 50 dB
Interface
Standard RS232 / USB (software included)
Optional SNMP / Relay card (dry contacts)
Dimensions
Weight (kg) 10.2 19.5 24
Dimensions W x D x H (mm) 144 x 405 x 215 191 x 455 x 332 191 x 455 x 332
Standard
EMC IEC/EN62040-2, IEC/61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8
Safety IEC/EN62040-1, IEC/EN60950-1

Video

Samurai VFI 1–3 kVA TC

VFI 1000 TC

Samurai VFI 1–3 kVA TC

VFI 2000 TC

Samurai VFI 1–3 kVA TC

VFI 3000 TC

We are always ready to help you!

call us
write us
return to products